B2B Purchase

B2B Purchase2021-05-26T08:43:18+00:00

The production for all branches of industry, speaks of the variety of materials from which these products are made. However, here are some of the most important materials and alloys. Also, we will describe, in short, the quality requirements of the material itself and its entire procurement.

If you have any of the mentioned materials or any other materials, means, equipment, and which we need, feel free to write. Send a message to nabavka@perfom.rs. It is best to state the essential elements of our possible future cooperation at the first contact, such as: company data and business certificates, material data (goods), certificates, delivery deadlines, price and payment terms.

Frequently asked questions


We make products for key customers from the following materials:

  • galvanized sheet metal in quality Dx51D Z200, in thicknesses from 0.6 mm to 1.8 mm
  • aluminum sheet in alloys EN AW 5005 H24 / 3105 H24, in thicknesses from 0.9 mm to 2.3 mm

From other types of materials, also important for our production, we use:

  • cold – rolled sheet metal – DC01, DC04… – in thicknesses from 0.5 mm to 3.0 mm
  • hot – rolled sheet – S235, S355, Manganese, Domex, Strenx in thicknesses from 2.0 mm to 10.0 mm
  • stainless steel sheet – AISI 304, AISI 316L, AISI430… in thicknesses from 0.5 mm to 4.0 mm
  • aluminum sheet – AL99.5, AlMg3, EN AW 3004 – H111… in thicknesses from 0.5 mm to 3.0 mm
  • galvanized sheet metal – Dx51D Z100, Z140, Z200, Z275, in thicknesses from 0.5 mm to 4.0 mm
  • copper, brass, bronze – thicknesses and dimensions according to customer requirements
  • laser cutting allows us to meet customer requirements and order materials up to 12 mm thick in certain dimensions

For tools we use:

  • tool steels
  • steels for improvement
  • high-speed, as well as structural steels of different diameters and dimensions
Quality of material2021-05-25T07:54:52+00:00

The quality of the material is expressed by certain international standards. Quality is proven in several ways: by submitting a Atest (Material Certificate), submitting a sample of material, quality control of the material. It is important to know that certain quality controls, due to the requirements of the product itself, are also performed during the production process.

Selection of supplier2021-05-25T07:55:34+00:00

The selection of the supplier is done according to a certain business review on the market, as well as through certificates, most often ISO, which indicates the quality of the overall management and business of that material supplier. Then the price, payment terms, delivery, and of course the quality of the material itself. Suppliers are ranked according to pre-determined criteria, procedures that are applied in our procurement department.

We have primary and alternative deliveries for all important material types. Because there is no quality if there is no material.